Chromatography Tubing
Microsolv Technology Corporation Tubing, PEEK, 0.040" ID, 1/16" OD, HPLC Grade, Grey Stripe. 5 Meter Roll. 1 EA.
This HPLC Grade, PEEK tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives. The red stripe is added only to the outside of the tubing leaving the interior all natural PEEK which eliminates leachables due to color. The internal and outer dimensional tolerances of this tubing is +/- 0.05mm. Color Code: Grey Stripe for 0.040" ( 1.0mm ) ID. Pressure rating: 2400 psi.
Microsolv Technology Corporation Tubing, PEEK, Coiled, 0.010" ID, 1/16" OD. 1585mm L, General Grade, Blue, with Tubing Connectors. 1 EA.
These Flexible, Coiled PEEK Tubes will expand and contract which will save space in places such as behind an instrument and provide a Pulse Dampener Effect for Parabolic Flow Fluids which will result in a quieter base line and also reduce band broadening due to excess tubing lengths. This coil is 50mm wide when resting and 300mm when fully extended, with a total tubing length of 1585mm, end to end. Color Coded: Blue for 0.010" (0.25mm) ID
Microsolv Technology Corporation Tubing, PEEK, 2mm ID, 1/8" OD, Natural Color. 10 Meter Roll. 1 EA.
This wide outer diameter, Laboratory Grade, PEEK tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives. The internal and outer dimensional tolerances of this tubing is +/- 0.05mm. Color: Natural. Pressure rating: 2400 psi.
Microsolv Technology Corporation Tubing, PEEK, 0.010" ID, 1/16" OD, HPLC Grade, Blue Stripe. 5 Meter Roll. 1 EA.
This HPLC Grade, PEEK tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives. The red stripe is added only to the outside of the tubing leaving the interior all natural PEEK which eliminates leachables due to color. The internal and outer dimensional tolerances of this tubing is +/- 0.05mm. Color Code: Blue Stripe for 0.010" ( 0.25mm ) ID. Pressure rating: 5600 psi.
Microsolv Technology Corporation Tubing, Capillary, PEEK, 75um ID, 360um OD, Natural Color. 10 Meter Roll. 1 EA.
This small OD, PEEK, capillary tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives. The internal and outer dimensional tolerances of this tubing is +/- 0.05mm. Color: Natural. Pressure rating: 5200 psi.
Microsolv Technology Corporation Tubing, PEEK, Coiled, 0.020" ID, 1/16" OD. 1225mm L, General Grade, Orange, with Tubing Connectors. 1 EA.
These Flexible, Coiled PEEK Tubes will expand and contract which will save space in places such as behind an instrument and provide a Pulse Dampener Effect for Parabolic Flow Fluids which will result in a quieter base line and also reduce band broadening due to excess tubing lengths. This coil is 35mm wide when resting and 200mm when fully extended, with a total tubing length of 1225mm, end to end. Color Coded: Orange for 0.020" (0.50mm) ID
Cole-Parmer Digi-Sense Type T Hermetically Sealed Tip Insulated Thermocouple, 20ft L, 24 Awg
Do not subject type J exposed-junction probes to moisture as they will rust
Microsolv Technology Corporation Tubing, PTFE, 0.020" ID, 1/16" OD, Low Pressure. 5 Meter Roll. 1 EA.
This MicroSolv PTFE ( Polytetrafluoroethylene ) Tubing is extruded from virgin PTFE, manufactured exclusively by DuPont. We do not add any additives to the original PTFE material, except for particles for color coding. This tubing is used widely in all low-pressure, laboratory applications including before and after an HPLC Pump such as with Mobile Phase Delivery and Solvent Waste Systems. Since PTFE tubing contains "micro-pores" in the tubing wall, which allows a quick air exchange, consideration for for use with degassed and oxygen-sensitive solvents is needed. Internal and Outer Dimensional Tolerance: +/- 0.20mm Color: Natural PTFE, Translucent ID: 0.020" ( 0.50mm ) Pressure rating: 725 psi.
Microsolv Technology Corporation Tubing, PEEK, 0.007" ID, 1/16" OD, HPLC grade, yellow stripe. 5-meter roll. 1 EA.
This HPLC Grade, PEEK tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives. The yellow stripe indicating size is applied to the outside of the tubing leaving the interior all-natural PEEK which eliminates color leachables. The internal and outer dimensional tolerances of this tubing is +/- 0.05mm. Color Code: Yellow Stripe for 0.007" ( 0.18mm ) ID. Pressure rating: 5800 psi with proper mobile phase conditions.
Thermo Scientific Advanced nanoViper Fingertight Fitting Systems 50 μm | | 1 EA
Ensure optimal separations and maximize your liquid chromatography LC instrument performance with virtually zero-dead-volume connections. Advanced capillaries extend the use case based on application requirements.
Microsolv Technology Corporation Tubing, PTFE, 0.010" ID, 1/16" OD, Low Pressure, Blue. 5 Meter Roll. 1 EA.
This MicroSolv PTFE ( Polytetrafluoroethylene ) Tubing is extruded from virgin PTFE, manufactured exclusively by DuPont. We do not add any additives to the original PTFE material, except for particles for color coding. This tubing is used widely in all low-pressure, laboratory applications including before and after an HPLC Pump. The blue color can be used to identify different lines often used with Mobile Phase Delivery and Solvent Waste Systems. Since PTFE tubing contains "micro-pores" in the tubing wall, which allows a quick air exchange, consideration for for use with degassed and oxygen-sensitive solvents is needed. Internal and Outer Dimensional Tolerance: +/- 0.20mm Color: Blue ID: 0.010" ( 0.25mm ) Pressure rating: 800 psi.
Microsolv Technology Corporation Tubing, PTFE, 0.010" ID, 1/16" OD, Low Pressure, Black. 5 Meter Roll. 1 EA.
This MicroSolv PTFE ( Polytetrafluoroethylene ) Tubing is extruded from virgin PTFE, manufactured exclusively by DuPont. We do not add any additives to the original PTFE material, except for particles for color coding. This tubing is used widely in all low-pressure, laboratory applications including before and after an HPLC Pump. The blue color can be used to identify different lines often used with Mobile Phase Delivery and Solvent Waste Systems. Since PTFE tubing contains "micro-pores" in the tubing wall, which allows a quick air exchange, consideration for for use with degassed and oxygen-sensitive solvents is needed. Internal and Outer Dimensional Tolerance: +/- 0.20mm Color: Black ( Often used for liquids that cannot be exposed to light) ID: 0.010" ( 0.25mm ) Pressure rating: 800 psi.
Microsolv Technology Corporation Tubing, PEEK, 0.020" ID, 1/16" OD, HPLC grade, orange stripe. 25-meter roll. 1 EA.
This HPLC Grade, PEEK tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives. The orange stripe indicating size is applied to the outside of the tubing leaving the interior all-natural PEEK which eliminates color leachables. The internal and outer dimensional tolerances of this tubing is +/- 0.05mm. Color Code: Orange Stripe for 0.020" ( 0.50mm ) ID. Pressure rating: 4500 psi with proper mobile phase conditions.
Microsolv Technology Corporation Tubing, PEEK, Coiled, 0.030" ID, 1/16" OD. 1225mm L, General Grade, Green, with Tubing Connectors. 1 EA.
These Flexible, Coiled PEEK Tubes will expand and contract which will save space in places such as behind an instrument and provide a Pulse Dampener Effect for Parabolic Flow Fluids which will result in a quieter base line and also reduce band broadening due to excess tubing lengths. This coil is 35mm wide when resting and 200mm when fully extended, with a total tubing length of 1225, end to end. Color Coded: Green for 0.030" (0.75mm) ID
Microsolv Technology Corporation Tubing, PEEK, Coiled, 0.010" ID, 1/16" OD. 710mm L, General Grade, Blue, with Tubing Connectors. 1 EA.
These Flexible, Coiled PEEK Tubes will expand and contract which will save space in places such as behind an instrument and provide a Pulse Dampener Effect for Parabolic Flow Fluids which will result in a quieter base line and also reduce band broadening due to excess tubing lengths. This coil is 10mm wide when resting and 30mm when fully extended, with a total tubing length of 700mm, end to end. Color Coded: Blue for 0.010" (0.25mm) ID